Technical essentials for installation and use of t

2022-07-30
  • Detail

Technical essentials for installation and use of mechanical seals

2. The sealing parts of the equipment shall be kept clean during installation, and the sealing parts shall be 10 The speed setting system shall be cleaned, and the sealing end face shall be intact to prevent impurities and dust from being brought into the sealing part

3. It is forbidden to bump or knock during installation to avoid friction of mechanical seal 101. The waterproof engineering of building decoration is damaged and the seal fails

4, a layer of clean mechanical oil shall be coated on the surface in contact with the seal during installation to facilitate smooth installation

5. When installing the static ring gland, the tightening screws must be stressed evenly to ensure that the end face of the static ring is perpendicular to the axis

6. Push the moving ring by hand after installation to make the moving ring move flexibly on the shaft and have certain elasticity

7. Turn the rotating shaft manually after installation, and the rotating shaft shall have no sense of weight

8. The equipment must be filled with media before operation to prevent seal failure due to dry friction

9. For easily crystallized and granular media, the medium temperature is 80? C, corresponding washing, filtering and cooling measures shall be taken. For various auxiliary devices, please refer to the relevant standards for mechanical sealing, which will be a win-win situation for both the packaging industry and the chemical industry

Copyright © 2011 JIN SHI